Bandsaw Machines


Swing Type Fully Automatic Band Saw Machines Model - HSAF 250


Features
  • Heavy duty, High Speed
  • High Productivity
  • Large Cross Section of Swing Frame
  • Integral Front & Rear Bed Design

Specifications

Cutting Capacity ø 250 & 🜚 230X230 mm
Blade Size 3760X27x0.9 mm
Feed Length 0-400 mm
Drive Motor 3 H.P
Hydraulic Motor 1 H.P
Coolant 0.15 H.P
Machine Operations Hydraulic
Cutting Speed 22, 44, 66, 88 m/min (4 Step SPZ-Pulley)
Band Tension Manual
Overall Size LxWxH 1975 X 1950 X1730 mm
Machine Weight 800 Kg.
Bundle Cutting Size (Optional Equipment) 110-150W X 60-100H mm


Vertical saw Head

Vertical saw Head is supported rigid pedestal bearings. Blade is guides by two hardened guide Roller & tungsten carbide wear parts. Blade tensioning & releasing is done by manually.

Saw Feed

"Up & Down" motion of head is controlled by one hydraulic cylinder. Feed for various materials is regulated by pressure relief valve.

Clamping

Clamping of job is done by Hydraulic vice. The jaw of the vice is perpendicular to the blade. The moving jaw of the vice clamps the job with sufficient hydraulic pressure. For tube cutting variable vice pressure system will be available as optional accessories.

Accuracy

Taper 0.1 mm for 100 mm. Length ± 0.2 mm

Band wheels

Drive and driven band wheels with optimum centre distance gives smooth blade twisting force which results in excellent performance of blade.

Standard Equipments
  • Complete electrical equipment with panel board, limit switch & electric motors
  • Complete hydraulic system with Yuken make DC valve.
  • Coolant System with pump and piping.
  • Power driven chip brush for easy chip removal from blade.
  • One M42 grade bimetal blade.
  • Operation tools & spanners.

Optional Equipments
  • Chip Brushes
  • Roller table 1500 mm
  • Bimetal Band saw blade
  • Variable vice pressure
  • Nesting fixture assembly for bundle cutting up to ø 35 mm polish bars.

Semi Automatic Band Saw Machines

Swing Type Semi Automatic Band Saw Machines Model - HSM 250


Features
  • Heavy duty, High Speed
  • Low Cost
  • Large Cross Section of Swing Frame

Specifications

Cutting Capacity ø 250 & 🜚 230X230 mm
Blade Size 3760X27x0.9 mm
Drive Motor 3 H.P
Hydraulic Motor 1 H.P
Coolant 0.15 H.P
Machine Operations Hydraulic
Cutting Speed 22,44,66,88 m/min (4 Step SPZ-Pulley)
Band Tension Manual
Overall Size LxWxH 1975 X 600 X1730 mm
Machine Weight 450 Kg.


Vertical saw Head

Vertical saw Head is supported rigid pedestal bearings. Blade is guides by two hardened guide Roller & tungsten carbide wear parts. Blade tensioning & releasing is done by manually.

Saw Feed

"Up & Down" motion of head is controlled by one hydraulic cylinder. Feed for various materials is regulated by pressure relief valve.

Clamping

Clamping of job is done by Hydraulic vice. The jaw of the vice is perpendicular to the blade. The moving jaw of the vice clamps the job with sufficient hydraulic pressure. For tube cutting variable vice pressure system will be available as optional accessories.

Accuracy

Taper 0.1 mm for 100 mm.

Band wheels

Drive and driven band wheels with optimum centre distance gives smooth blade twisting force which results in excellent performance of blade.

Standard Equipments
  • Complete electrical equipment with panel board, limit switch & electric motors
  • Complete hydraulic system with Yuken make DC valve.
  • Coolant System with pump and piping.
  • Power driven chip brush for easy chip removal from blade.
  • One M42 grade bimetal blade.
  • Operation tools & spanners.

Optional Equipments
  • Chip Brushes
  • Roller table 1500 mm
  • Bimetal Band saw blade
  • Variable vice pressure

Fully Automatic Double Column Band Saw Machines Model - DCA 160, 260, 340


Features
  • Heavy duty, High Speed
  • Low Cost
  • High Productivity
  • Large Cross Section of Swing Frame
  • Integral Front & Rear Bed Design

Specifications

Cutting Capacity 🜚 160 ø 160 🜚 260 ø 260 🜚 340 ø 340 🜚 421 ø 421 🜚 550 ø 550 🜚 650 ø 650
Blade Size 3505x27x0.9 mm 4100x34x1.1 mm 4570x34x1.1 mm 5300x41x1.3 mm 6270x41x 1.3 mm 7600x54x1.6 mm
Feed Length 0-400 mm 0-400 mm 0-400 mm 0-400 mm --- ---
Drive Motor 2 H.P 3 H.P 5 H.P 7 H.P 7 H.P 10 H.P
Hydraulic Motor 1 H.P 1 H.P 1.5 H.P 1.5 H.P 2 H.P 2 H.P
Coolant 0.15 H.P 0.15 H.P 0.15 H.P 0.15 H.P 0.2 H.P 0.2 H.P
Band Tension Manual / Hydraulic optional Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic


Vertical saw Head

Vertical saw Head is supported rigid induction hardened & hard crome plated & ground guide Columns. Blade tensioning is done by Manual/Hydraulically operated cylinders. Auto height sensor optimizes ideal position of blade with least down time.

Saw Feed

Vertical saw Head up down motion is controlled by one hydraulic cylinder. Feed for various materials is regulated by temperature and pressure compensatede flow control valve. FFC valve is provided to control the cutting pressure required for various types of Material & different tensile strength and BHN.

Clamping

Clamping of job is done by Hydraulically operated vice jaws. Fixed Vice Jaws are perpendicular to the blade. The moving vice clamps the job with sufficient work pressure. For tube cutting variable vice pressure will be provided as optional accessories.

Floating Vice Jaws

To accommodate bend back bars. Floating vice jaw arrangement is provided for shuttle vice. This feature comes only in fully Automatic Double Column Model.

Accuracy

Taper 0.1 mm for 100 mm. Length ± 0.2 mm

Band wheels

Drive and driven band wheels with optimum centre distance gives smooth blade twisting force which results in excellent performance of blade.

Standard Equipments
  • Complete electrical equipment with panel board, limit switch & electric motors
  • Complete hydraulic system with Yuken make DC valve.
  • Coolant System with pump and piping.
  • Power driven chip brush for easy chip removal from blade.
  • One M42 grade bimetal blade.
  • Operation tools & spanners.

Optional Equipments
  • Chip Brushes
  • Roller table 1500 mm
  • Bimetal Band saw blade
  • Variable vice pressure
  • Nesting fixture assembly for bundle cutting up to ø 35 mm polish bars.






Double Column Heavy Duty Band Saw Machine Model - DCM - 340






Roller Table




Control Panel


Specifications

Model DCM- 340
Cutting Capacity 340mm ø 340 mm
Blade Size 4650 X 34 X 1.1 mm
Drive Motor 5 H.P
Hydraulic Motor 1.5 H.P
Coolant Motor 0.15 H.P
Band Tension Hydraulic
Machine Weight 2800 Kg.
Overall Size LxWxH 2050 x 1950 x 1750


Vertical saw Head

Vartical Saw Head is Supported by two Rigid Induction hardned & Hard Chrome plated & ground columns. Blade tensioning is done by Manual / Hydraulically operated cylinders. Auto Hight sensor optimizes ideal position of blade with least down time.

Saw Feed

Vartical Saw Head up down motion is controlled by two Hydraulic cylinders. Feed for various material is regulated by temperature & pressure compensated flow control valve. FFC valve is provied to control the cutting pressure required for various types of materials & different tensile strength & BHN.

Clamping

Clamping of job is done by hydraulically operated vice Jaws. Fixed vice jaws are perpendicular to the blade. The moving vice clamps the job with sufficient work pressure. For tube cutting variable vice pressure will be provied as optional accessories.

Accuracy

Taper 0.1 mm for 100 mm.

Band wheels

Drive & Driven band wheels with optimum centre distance gives smooth blade twisting force which results in excllent performance of blade.

Standard Equipments
  • Complete Electrical Equipment with panel board, limit switch & electric Motors.
  • Complete Hydraulic system with Yuken cip DC valve.
  • Coolant systems with pump piping.
  • Poer driven chip brush for easy chip removal from blade.
  • One M42 grade Bimetal Blaes.
  • Peratation Tools & Spaneers.

Band Wheels
  • Chip Brushes
  • Roller 1500 mm.
  • Bimetal Band saw Blade.
  • Variable Vice pressure.
  • Variable frequency Drive.






Double Column Heavy Duty Band Saw Machine Model - DCM - 421






Roller Table




Control Panel


Specifications

Model DCM- 421
Cutting Capacity 421mm ø 421 mm
Blade Size 5300 X 41 X 1.3 mm
Drive Motor 7.5 HP
Hydraulic Motor 1.5 H.P
Coolant Motor 0.15 H.P
Band Tension Hydraulic
Machine Weight 3500 Kg.
Overall Size LxWxH 2200 x 1900 x 1550


Vertical saw Head

Vartical Saw Head is Supported by two Rigid Induction hardned & Hard Chrome plated & ground columns. Blade tensioning is done by Manual / Hydraulically operated cylinders. Auto Hight sensor optimizes ideal position of blade with least down time.

Saw Feed

Vartical Saw Head up down motion is controlled by two Hydraulic cylinders. Feed for various material is regulated by temperature & pressure compensated flow control valve. FFC valve is provied to control the cutting pressure required for various types of materials & different tensile strength & BHN.

Clamping

Clamping of job is done by hydraulically operated vice Jaws. Fixed vice jaws are perpendicular to the blade. The moving vice clamps the job with sufficient work pressure. For tube cutting variable vice pressure will be provied as optional accessories.

Accuracy

Taper 0.1 mm for 100 mm.

Band wheels

Drive & Driven band wheels with optimum centre distance gives smooth blade twisting force which results in excllent performance of blade.

Standard Equipments
  • Complete Electrical Equipment with panel board, limit switch & electric Motors.
  • Complete Hydraulic system with Yuken cip DC valve.
  • Coolant systems with pump piping.
  • Poer driven chip brush for easy chip removal from blade.
  • One M42 grade Bimetal Blaes.
  • Peratation Tools & Spaneers.

Band Wheels
  • Chip Brushes
  • Roller 1500 mm.
  • Bimetal Band saw Blade.
  • Variable Vice pressure.
  • Variable frequency Drive.






Double Column Heavy Duty Band Saw Machine Model - DCM - 550






Roller Table




Control Panel


Specifications

Model DCM- 550
Cutting Capacity 550mm ø 550 mm
Blade Size 6270 X 41X 1.3 mm
Drive Motor 7.5 HP
Hydraulic Motor 2 H.P
Coolant Motor 0.2 HP
Band Tension Hydraulic
Machine Weight 3800 Kg.
Overall Size LxWxH 3500 x 1950 x 2650


Vertical saw Head

Vartical Saw Head is Supported by two Rigid Induction hardned & Hard Chrome plated & ground columns. Blade tensioning is done by Manual / Hydraulically operated cylinders. Auto Hight sensor optimizes ideal position of blade with least down time.

Saw Feed

Vartical Saw Head up down motion is controlled by two Hydraulic cylinders. Feed for various material is regulated by temperature & pressure compensated flow control valve. FFC valve is provied to control the cutting pressure required for various types of materials & different tensile strength & BHN.

Clamping

Clamping of job is done by hydraulically operated vice Jaws. Fixed vice jaws are perpendicular to the blade. The moving vice clamps the job with sufficient work pressure. For tube cutting variable vice pressure will be provied as optional accessories.

Accuracy

Taper 0.1 mm for 100 mm.

Band wheels

Drive & Driven band wheels with optimum centre distance gives smooth blade twisting force which results in excllent performance of blade.

Standard Equipments
  • Complete Electrical Equipment with panel board, limit switch & electric Motors.
  • Complete Hydraulic system with Yuken cip DC valve.
  • Coolant systems with pump piping.
  • Poer driven chip brush for easy chip removal from blade.
  • One M42 grade Bimetal Blaes.
  • Peratation Tools & Spaneers.

Band Wheels
  • Chip Brushes
  • Roller 1500 mm.
  • Bimetal Band saw Blade.
  • Variable Vice pressure.
  • Variable frequency Drive.






Double Column Heavy Duty Band Saw Machine Model - DCM - 650






Roller Table




Control Panel


Specifications

Model DCM- 650
Cutting Capacity 650mm ø 650 mm
Blade Size 7600 X 45X 1.6 mm
Drive Motor 10 HP
Hydraulic Motor 2 HP
Coolant Motor 0.2 HP
Band Tension Hydraulic
Machine Weight 4500 Kg
Overall Size LxWxH 3700 x 1950 x 2750


Vertical saw Head

Vartical Saw Head is Supported by two Rigid Induction hardned & Hard Chrome plated & ground columns. Blade tensioning is done by Manual / Hydraulically operated cylinders. Auto Hight sensor optimizes ideal position of blade with least down time.

Saw Feed

Vartical Saw Head up down motion is controlled by two Hydraulic cylinders. Feed for various material is regulated by temperature & pressure compensated flow control valve. FFC valve is provied to control the cutting pressure required for various types of materials & different tensile strength & BHN.

Clamping

Clamping of job is done by hydraulically operated vice Jaws. Fixed vice jaws are perpendicular to the blade. The moving vice clamps the job with sufficient work pressure. For tube cutting variable vice pressure will be provied as optional accessories.

Accuracy

Taper 0.1 mm for 100 mm.

Band wheels

Drive & Driven band wheels with optimum centre distance gives smooth blade twisting force which results in excllent performance of blade.

Standard Equipments
  • Complete Electrical Equipment with panel board, limit switch & electric Motors.
  • Complete Hydraulic system with Yuken cip DC valve.
  • Coolant systems with pump piping.
  • Poer driven chip brush for easy chip removal from blade.
  • One M42 grade Bimetal Blaes.
  • Peratation Tools & Spaneers.

Band Wheels
  • Chip Brushes
  • Roller 1500 mm.
  • Bimetal Band saw Blade.
  • Variable Vice pressure.
  • Variable frequency Drive.



High Speed Vertical Bandsaw Machine Model - VT 350 - M (Manual)


Specifications

Throat 350 mm
Height 500 mm
Work Table 500 x 700 mm
Blade Size 3760 x 27 x 0.9 mm
Cutting Speed 22, 44, 66, 88 m / min
Drive Motor 2 H.P
Coolant Motor 0.12 H.P
Hydraulic Motor 1 H.P. (SA Model)
Hydraulic Slide Stroke 400 mm (SA Model)
Blade Tension Manual Hyd. Optional For SA Model


Fixtures

Model VT - 350 M is Manual is Hydraulic Semi auto is rigid, Heavy Duty, High speed Machine

Blade is guided by tungsten Carbide wear pads & Hardened Guide rollers to improve the blade life.

The machine is suitable for cutting Rrisers, Runners of Casting, Certical Space Plates, Sheets, Round, Hex Squre of all types of materials & even Angular cross section.

Bandwheels are Graded C.I. material.

The Speed Reduction is given through High Power Transmission Gear box.



Standard Equipments
  • Machine with T-solt Work table
  • Power Driven chip Brush Assy
  • Coolant System with pump and piping
  • One M42 grade bimetal blade
  • Hydraulic powe pack for SA model
  • Operation tools & spanners
  • Work Lamp

Optional Equipments
  • Chip Brush
  • Bimetal Band saw blade
  • Roller table
  • Special Manual or Hydraulic Fixtures

High Speed Vertical Bandsaw Machine VT 350 - SA ( Hydraulic Semi - Automatic )


Specifications

Cutting depth 350 mm
Maximum cutting height 350 mm.
Work piece cutting length 500mm
Blade Size 3760 x 27 x 0.9mm.
Blade Speed 30, 44, 66m / min
Drive Motor HP 2 HP LHP make
Coolant motor HP 0.12 HP Rajmane make
Hydraulic motor HP 1 HP LHP make
Gear Box Greaves make
Electrical Bhartia cuttler Hammer


Fixtures

Model VT - 350 SA is Hydraulic Semi auto is rigid, Heavy Duty, High speed Machine

Blade is guided by tungsten Carbide wear pads & Hardened Guide rollers to improve the blade life.

The machine is suitable for cutting Rrisers, Runners of Casting, Certical Space Plates, Sheets, Round, Hex Squre of all types of materials & even Angular cross section.

Bandwheels are Graded C.I. material.

The Speed Reduction is given through High Power Transmission Gear box.



Standard Equipments
  • Machine with T-solt Work table
  • Power Driven chip Brush Assy
  • Coolant System with pump and piping
  • One M42 grade bimetal blade
  • Hydraulic powe pack for SA model
  • Operation tools & spanners
  • Work Lamp

Optional Equipments
  • Chip Brush
  • Bimetal Band saw blade
  • Roller table
  • Special Manual or Hydraulic Fixtures

Miter Cutting Bandsaw Machine - 0-45 degree.

Mfrs. Of Bandsaw Machine, Centring Facing Machine & Special Purpose Machines Angular Cutting Bandsaw Machine MODEL: HSMA-250.

Features
  • Heavy duty, High Speed
  • Low Cost
  • Large Cross Section of Swing Frame

Specifications

Cutting Capacity 🜚 250 & ø 250X250 mm
Max. cutting diameter at 90 degree 🜚 250 & ø 250X250 mm
Max. cutting diameter at 45 degree 🜚 160 & ø 160X250 mm
Drive Motor 3 H.P
Hydraulic Motor 1 H.P
Coolant 0.15 H.P
Machine Operations Hydraulic
Cutting Speed 22,44,66,88 m/min (4 Step SPZ-Pulley)
Band Tension Manual
Blade Size 3760X27x0.9 mm
Overall Size L x W x H 1975 X 1200 X 1730 mm
Machine Weight 750 Kg.